久久伊人超碰中文字幕,亚洲中文不卡视频久草精品在线99,青青草av在线播放,首页亚洲视频另类

U型玻璃是采用特殊工藝加工而成的新型建筑墻體材料，具有不可燃燒的特性。U型玻璃可用于建筑內墻、外墻、隔斷等位置，如若用于外墻常用于多層建筑，玻璃所使用的高度取決于項目當?shù)氐娘L(fēng)荷載、距離地面高度、玻璃連接方式等。

U-shaped glass is a new type of building wall material which is processed by special technology and has the characteristic of non-combustible. U-shaped glass can be used for internal walls, external walls, partitions and other positions. If it is used for external walls, it is often used for multi-storey buildings. The height of glass used depends on the local wind load of the project, the height from the ground, the connection mode of glass and so on.

U型玻璃

U型玻璃玻璃可采用單層、多層安裝方式，是否預留通風縫可根據設計圖而定。U型玻璃可采用鋁型材（常見方式）、不銹鋼邊框、黑色金屬材料等作為包邊，同時金屬材料要做好相應的防腐防銹處理。U型玻璃的生產安裝可參考以下圖集和標準：

建筑材行業標準JC/T 867-2000《建筑用U形玻璃》

德國工業標準DIN1055和DIN1249

國家建筑標準設計圖集06J505-1《外裝修(一)》

U型玻璃不同尺寸規格參數：

U-shaped glass can be installed in single or multiple layers. Whether ventilation joints are reserved can be determined according to the design drawing. U-shaped glass can be aluminum (common), stainless steel frame, black metal materials as the edge, while the metal materials to do the corresponding anti-corrosion and anti-rust treatment. The production and installation of u-shaped glass can refer to the following atlas and standards:
Building material industry standard JC/T 867-2000 "u-shaped glass for building"
German industrial standard DIN1055 and DIN1249
National building standard design atlas 06j505-1 "exterior decoration (I)"
Specification parameters of different sizes of u-shaped glass:

建筑U型玻璃安裝要求：

1、固定型材：將鋁型材或其他金屬型材用不銹鋼螺栓或鉚釘固定在建筑上，邊框材料與墻面或建筑洞口牢固固定，每延米應不低于2個固定點。

Installation requirements for u-shaped glass in buildings:
1, fixed profiles: aluminum profiles or other metal profiles with stainless steel bolts or rivets fixed in the building, frame material and the wall or the building hole fixed firmly, each meter should not be less than 2 fixed points.

U型玻璃隔斷設計

2、玻璃入框架：將U型玻璃內面洗凈，鑲?cè)肟蚣埽瑢⑵鹁彌_作用的塑料件截成相應長度放入固定框架內。

3、U型玻璃安裝到最后三塊時，先將兩塊玻璃放入邊框，再用第三塊玻璃封扣；如果剩余洞口寬度余量不能裝入整塊玻璃時，可將U型玻璃沿著長度方向裁切來滿足剩余寬度，裁切后的玻璃應該先行安裝。

4、對于溫差加大的地區，U型玻璃之間的間隙應根據溫度進行伸縮調整；

2. Glass into the frame: wash the inner surface of the u-shaped glass and insert it into the frame. Cut the plastic parts with buffer function into corresponding lengths and put them into the fixed frame.
3. When the u-shaped glass is installed to the last three pieces, first put the two pieces of glass into the frame, and then seal the buckle with the third piece of glass; If the remaining width of the hole cannot fit into the whole glass, the u-shaped glass can be cut along the length to meet the remaining width, and the cut glass should be installed first.
4. For regions where the temperature difference increases, the gap between u-shaped glasses should be adjusted according to the temperature;

U型玻璃隔斷設計

5、U型玻璃水平寬度大于2m時，橫向構件水平度可允許3mm偏差；當高度不大于5m時，邊框垂直度允許5mm偏差；高度不大于6m時，構件跨向撓度允許8mm偏差；

6、邊框與U型玻璃之間用彈性墊條填充縫隙，墊條與玻璃和邊框接觸面不少于12mm;

7、在邊框與玻璃，玻璃與玻璃，邊框與建筑結構體存在的接縫采用玻璃膠類彈性密封材料(或硅酮膠密封)進行填充；

5. When the horizontal width of u-shaped glass is more than 2m, the horizontal degree of transverse members can be allowed to have a deviation of 3mm; When the height is no more than 5m, the verticality of the border is allowed to have a deviation of 5mm. When the height is not more than 6m, the member's cross-deflection is allowed to be 8mm deviation;
6. Fill the gaps between the frame and the u-shaped glass with elastic strip, and the contact surface between the strip and the glass and the frame shall be no less than 12mm;
7. The joints between the frame and the glass, the glass and the glass, the frame and the building structure are filled with the elastic sealing material of glass glue (or silicone rubber seal);

U型玻璃外墻設計

8、U形玻璃建筑墻體時非承重墻，不可受力，邊框承受的荷載力應傳給建筑物；

9、U型玻璃及邊框安裝完工后，玻璃內外表面擦拭干凈，清潔場地遺留的物品。

8, u-shaped glass building wall is not load-bearing wall, can not bear the force, the frame load should be transmitted to the building;
9. After the installation of u-shaped glass and its frame, the inner and outer surfaces of the glass shall be wiped clean to clean the articles left behind in the site.